Having a strand of hair stuck in your necklace chain can be annoying and frustrating. That little hair can make your lovely necklace look messy and unkempt. Don’t worry – with some simple techniques, you can get that pesky hair out of the chain and have your jewelry looking fabulous again.
How to Get Hair Out of Necklace Chain?
Use Tweezers or Needle-Nose Pliers
One of the easiest ways to remove the hair is by using a pair of precision tweezers or needle-nose pliers. Follow these steps:
- Clamp the tweezers around the top of the strand of hair where it meets the chain.
- Gently pull the hair up and out of the linked chain.
- Be careful not to break the chain or pull too hard.
- For finer chains, needle-nose pliers may work better than tweezers. Grip the hair as close to the links as possible.
- Slowly pull straight up until the hair slides out from between the narrow openings.
Tweezers and pliers allow you to grip the hair precisely and pull it out carefully without damaging the necklace. For tiny links, you may need to use a magnifying glass to see the hair clearly.
Try Using Tape
Using tape is an easy, no-tools-required method. Follow these steps:
- Place a strip of clear packing tape or scotch tape over the area of the chain with the stuck hair.
- Press gently so the tape adheres to the hair and chain.
- Carefully lift the tape straight up to pull the hair out of the links as it sticks to the tape.
- Some pulling pressure may be required for thicker chain styles.
- For best results, position the tape perpendicular to the strand of hair, not along its length.
The adhesive on the tape grabs onto the hair and allows you to simply lift and extract it from the chain. This works well for delicate chains and links.
Use a Vacuum Cleaner
A mini vacuum cleaner can suction out pieces of dust, dirt and hair caught in necklace chains. Here’s how:
- Stretch the chain area with the hair flat against a table or clean surface.
- Turn on a small battery operated hand vacuum or mini dust-buster.
- Hold the suction tip just above the hair on the chain.
- Carefully vacuum over the links to lift and suck up the hair.
- Avoid direct contact between the suction and chain to prevent scratching.
- For longer necklaces, vacuum in short sections for best control.
The vacuum cleaner provides an easy, no-contact way to remove the hair. The suction grabs and pulls up the strand of hair safely out of the links. It works well for delicate chains and charms.
Use Jewelry Cleaner Solution
Jewelry cleaner fluid can help dissolve and dislodge hair stuck in necklace chains. Here’s how to use it:
- Fill a small bowl with jewelry cleaning solution. Many brands are available or make your own with mild soap and water.
- Submerge the necklace chain in the solution so the stuck hair area is covered.
- Let the chain soak for 5-10 minutes allowing the solution to penetrate the links.
- Scrub very gently over the hair with a soft jewelry brush or toothbrush. Avoid scrubbing the metal.
- Rinse under running water. The hair should slide out during rinsing.
- Pat dry carefully with a soft cloth. Do not rub the chain roughly.
The jewelry cleaner helps loosen debris to remove it by dissolving oils and residue around the hair. Rinsing and gentle brushing finishes the process.
Take It to a Jeweler
For chains and links too small and intricate to access the stuck hair, take the necklace to a jeweler. Here’s what they can do:
- Jewelers have professional degreasing solutions to loosen stuck-on grime and buildup.
- They use high-powered magnifying lenses to see and access tiny spaces.
- Jewelers have very fine picks and probes to gently tease out trapped hair.
- Ultrasonic cleaners vibrate jewelry to dislodge trapped particles extremely gently.
- For tricky situations they can even split and re-attach chain links if needed.
Getting professional help ensures the necklace chain and settings are not damaged. Let them assess if the chain needs repair.
Prevent Hair From Sticking Again
Here are some tips to prevent hair getting stuck again after removing it:
- Wipe chains with a soft cloth after wearing to remove oils that can trap hair.
- Avoid applying lotions and perfumes directly on necklaces.
- Store chains flat or hanging to avoid contact and tangling with materials that could shed.
- Consider shorter chain lengths that won’t move around as much and get snagged.
- Opt for smoother chain styles like cable chains that leave less space for hair to get trapped.
- Regularly inspect chains and clean as soon as hair gets stuck before it gets compacted tightly.
Conclusion
Getting an annoying strand of hair stuck in a necklace chain is a common nuisance. With the right tools and techniques, you can easily remove it yourself. For delicate chains and settings, seek professional help to avoid damage. Prevention is also key. Keep chains clean, stored properly, and well-maintained. By promptly removing any hair that gets trapped, you can keep your special necklaces looking beautiful.