How to Clean a Razor Blade ?

Posted on by fannyl

How to Clean Electric Razors ?

Electric razor is the daily use of boys more frequent supplies. But after a period of time you need to clean, or easy to breed bacteria, or scruff will be stuffed with electric blades resulting in poor rotation. Or even directly stuck and so on, which requires frequent cleaning. After the completion of cleaning will become smoother, shaving effect becomes better, often clean and charge maintenance can extend the life of your electric shaver. So, how to clean hair out of razor?

  

 

Why Hair in Razors Reduces Shaving Efficiency ?

Blades can deform when shaving, rather than simply wearing down the edge of the blade. In some cases, a single strand of hair can cause the blade to shatter. Once the initial crack is formed, the blade is susceptible to further wear. As more and more cracks are formed around the initial crack, the razor edge quickly becomes dull. It’s the same thing as a kitchen knife cutting vegetables. If the steel has an uneven microstructure, the blade is more likely to chip. The angle of approach of the blade to the hair can also have an effect on razor wear. So how to clean hair out of razor?

 

Use Hot Water to Rinse Away Hair in Razors

After each use is to use hot water to rinse the razor head parts and stubble storage part, but do not use boiling water. Specific steps is to open the head can be rinsed directly, after rinsing, do not use a towel or something to wipe, because it may damage the head, directly shake off excess water and air dry on the line. Every six months to clean the mesh, blade, all removed, with a soft brush, do not mix each blade and mesh, after all, are matching, mixed to re-grind a period of time. The head of the electric shaver is separate from the body and can be rinsed directly with water. It will not have any effect. And with the water washing function of the knife means that the entire body are waterproof sealing treatment.

 

Scrub With a Toothbrush to Dislodge Trapped Stubble

For electric shavers that are not fully washable, the first step in cleaning is to disassemble the cutterhead by removing the mesh, head, and bracket. Use a small cleaning brush or an unused toothbrush to clean the residue around the shaver’s drive shaft, paying attention to some of the crevices should be brushed clean, because this also plays a maintenance purpose. Then for the knife net, head, bracket part of the cleaning, because most of the knife net and head are now stainless steel, so we have to rinse these three components under the faucet first, and then put into the detergent water, soak for about 5 minutes to remove.

 

Apply Shaving Cream to Loosen and Remove Hair Buildup

Shaving creams generally have antibacterial and lubricating properties that protect the skin by reducing friction between the blade and the skin during the shaving process. Using shaving cream during washing softens the beard residue left inside the blades. This makes it easy to remove the whiskers from within the blades with subsequent washing. The antiseptic and anti-inflammatory properties of shaving cream also help us to clean the electric razor better. What’s more, men who use razors usually have a bottle of shaving cream, so it’s not as convenient as going to the supermarket or specialty store to buy a beard softening agent.

 

Soak in White Vinegar to Dissolve Razor Hair Remnants

We can pour an appropriate amount of white vinegar inside the container, white vinegar has the effect of softening dirt, can be very good to soften some of the grease on it, dirt. Then take an old toothbrush over and scrub it with the toothbrush. Vinegar can react chemically with the rust on the metal and break it down. So using white vinegar can also remove any rust that may be present on the blade, so that it can have a good cleaning effect. After finding rust on the blade, we can wash it with water a few times, then soak it in vinegar, the rust disappears and then pick it up again to wash it with water and dry it in time, otherwise it will rust faster next time.



Replace or Sharpen Blades Regularly for Optimal Performance

Blades dull, can not shave cleanly, or in the shaving process is very reluctant, don’t use again, not only will cause damage to the skin, but also quite unsafe. The razor blade and the blade net are the components of an electric shaver and they have different life spans. The blades gradually wear down and are no longer sharp during use, while the mesh is also subject to wear and tear from prolonged use and can harbor bacteria.




Store Razor in a Dry, Well-Ventilated Area

How the blade has been in a wet state, may lead to extensive rust, so you need to clean after the drying treatment. Just simply use a paper towel or absorbent cotton cloth spread out after wiping the individual cutter head, wait 5 to 10 minutes and then simply air-dry it, the conditions can be used to air-dry the air blower, the effect will be better. To protect the blade, it must be covered with a protective cover and stored in a box in a dry place.




Knowing When It’s Time to Replace Your Razor

Electric shavers can be categorized into: rotary and reciprocating. Rotary shavers replace their blades as often as two years; reciprocating shavers replace their blades as often as one year and six months. Electric razor blade replacement frequency is longer, generally in 18 months or so, of course, or according to your own frequency of use to judge, 7 days a shaving this frequency. In fact, more than 2 years and then replace it is also completely possible.



Overall, cleaning an electric shaver is not a hassle, but it is a necessity. We must know how to clean hair out of razor. Untimely or uncleaned razor can harbor a lot of bacteria. It will not only damage your skin but also reduce the life span of your razor. So take action and clean your electric shaver!

Leave a Reply